Install Instructions

1) Create an install directory for the Merlin Drivers.

2) Copy Merlin.inf, MerlinAVS.inf, and the i386, ia64 and x64 
   directories to the install directory.

3) From the Control Panel double click on Add/Remove Hardware
   or wait for the "Found New Hardware" dialog wizard when the 
   system is first turned on.

4) At the prompt where you are asked if Windows can connect to 
   Windows Update select "No, not this time" and then click next.

5) At the prompt where you are asked what you want the wizard
   to do select "Install from a list or specific location" and 
   then click "Next".

6) In the next dialog box select "Search for the best driver in 
   these locations" and make sure that "include this location 
   in the search" is the only box checked.

7) Enter the path or use the browse button to specify the location
   where you copied Merlin.inf and then click "Next".

8) The next dialog box should say it has found a Merlin05 board.
   Click Next to complete the installation.

9) During the installation you will see a message saying the 
   driver is unsigned by Microsoft. This is expected and you 
   should continue the installation anyway.

10) Repeat the above steps for the Merlin05 Streaming Device using
    the MerlinAVS.sys and MerlinAVS.inf files.

11) You can now install and run the Merlin application Software.

