Install Instructions

1) Create an install directory for the Merlin Drivers.

2) Copy Merlin.sys, MerlinAVS.sys, Merlin.inf and MerlinAVS.inf 
   to the install directory.

3) From the Control Panel double click on Add/Remove Hardware
   or wait for the "Found New Hardware" dialog wizard when the 
   system is first turned on.

4) Answer all the questions asked by the wizard.

5) At the prompt where you are asked what you want the wizard
   to do select "Search for a suitable driver..." and then 
   click "Next".

6) In the next dialog box make sure that "Specify a location"
   is the only box checked.

7) In the next dialog box enter the path to where you copied 
   Merlin.inf and then click OK.

8) The next dialog box should say it has found a Merlin2000 board.
   Click Next to complete the installation.

9) During the installation you will see a message saying the 
   driver is unsigned by Microsoft. This is expected and you 
   should continue the installation anyway.

10) Repeat the above steps for the Merlin2003 Streaming Device using
    the MerlinAVS.sys and MerlinAVS.inf files.

11) You can now install and run the Merlin application Software.

